Flat glass and mirrors present unique shipping challenges. Unlike rounded ceramics that might survive an impact that creates a crack, glass panels can shatter completely from a single point of pressure, and broken glass creates a safety hazard for everyone handling the parcel downstream.
This guide explains how to pack flat glass items correctly for courier delivery, with specific techniques for different sizes and frame types.
Before You Pack: Check Carrier Restrictions
Many standard courier services exclude plain glass (without a frame) or large mirrors from their standard liability. Some carriers will not accept unframed glass at all. Check the specific carrier's conditions before booking. For large or particularly valuable glass items, a specialist art and antiques shipper or a road freight service may be more appropriate.
Materials for Packing Glass and Mirrors
- Masking tape or packing tape applied in a cross or asterisk pattern across the glass surface — this holds shards together if the glass cracks, preventing further breakage and injury during handling
- Foam corner protectors — plastic or foam L-shaped guards that fit over each corner
- Bubble wrap (minimum two full layers)
- A picture box or mirror box (available from packaging suppliers — a telescoping double-walled box sized for flat items)
- Foam or cardboard edge reinforcement strips
Step-by-Step Packing Process
- Apply a cross of tape across the entire face of the glass to hold any broken pieces in place. This is a safety measure, not cushioning.
- Fit foam corner protectors on all four corners.
- Wrap the entire item in bubble wrap, minimum two full layers. Secure with tape but do not use tape directly on glass frames without protection.
- Place in a suitably sized box (mirror box or telescoping picture box) with 5–7 cm of foam cushioning on all sides.
- Seal the box and mark all sides: 'FRAGILE GLASS — DO NOT STACK — THIS WAY UP'.
Shipping Framed Mirrors vs Unframed Glass
Framed mirrors are significantly easier to ship than bare glass. The frame provides structural rigidity, distributes impact away from the glass surface, and gives the packing materials something to grip. For unframed glass or mirror panes, consider whether a specialist shipper is a better option for large sizes.
Common Questions
What size box should I use for a mirror?
The box should be at least 10–14 cm larger than the mirror dimensions in all directions to allow for sufficient cushioning. Using a box that's too close in size to the mirror offers almost no protection — if the box is dented, the mirror breaks.
Is broken glass covered by transit insurance?
It depends. Some carriers and insurers exclude plain glass or mirrors from their liability. Others will cover it with proof of correct packaging. Always check the carrier's terms and your insurance policy before shipping high-value glass items.



