Automotive parts present a wide range of packaging challenges. A gear knob and a front bumper require completely different approaches. Getting the packaging right matters both for the part itself and for other parcels in the same delivery vehicle — heavy metal parts that break free from poor packaging can damage everything around them.
This guide covers how to pack the most commonly shipped automotive parts correctly.
Metal Components and Mechanical Parts
Metal parts such as engine components, brake calipers, hubs, and gearboxes are heavy and can have sharp edges. The main packaging priorities are: preventing corrosion from moisture, protecting finished surfaces from scratching, and ensuring the part cannot shift and damage its own box or other parcels.
- Clean any oil or fluid from surfaces and wrap in VCI (Vapour Corrosion Inhibitor) film if the part has machined surfaces that can corrode
- Wrap sharp edges in foam pipe lagging or cardboard to prevent the part from cutting through its packaging
- Use a double-walled corrugated box, ideally with foam padding on the base and sides — not just on top
- For single heavy parts over 15 kg, consider whether a wooden crate provides better protection than a cardboard box
Glass Parts: Windscreens and Windows
Automotive glass (windscreens, side windows, rear windows) requires the same care as flat glass. Apply tape in a cross pattern across the surface, use foam edge protection, and double-box. Specialist automotive glass couriers are available for large windscreens. A standard courier is not appropriate for a full windscreen.
Rubber Seals, Gaskets, and Hoses
Rubber parts are vulnerable to deformation when compressed under other items and to cracking in cold temperatures. Pack rubber parts flat (not rolled, unless they were stored rolled). Do not place heavy items on top of rubber seals. Use a bag or box that keeps the rubber part in its natural shape.
Large Body Panels and Bumpers
Large panels (doors, bonnets, bumpers, mudguards) often exceed standard parcel size limits. Courier parcel limits are typically 300 cm total girth — a full bumper will frequently exceed this. These parts require a pallet or freight booking. Wrap in foam sheeting, protect edges and mounting points with foam blocks, and strap to a pallet if necessary.
Common Questions
Can I ship used parts with oil or fluid residue?
Drained and cleaned parts are generally acceptable. Parts that still contain fuel, engine oil, or brake fluid may be classified as dangerous goods (Class 3 or Class 8 depending on the substance). Drain and clean all parts thoroughly before shipping, and confirm with your carrier that the parts are clean.
Do HS codes apply to used automotive parts?
Yes. All international shipments of automotive parts — new or used — require correct HS codes on customs declarations. Used parts may be classified under different HS codes than new parts in some tariff schedules. Check the destination country's tariff classification for used automotive parts specifically.




