Packaging GuidesNovember 22, 20262 min read

How to Pack a TV for Shipping: What to Do When You Don't Have the Original Box

Large packaged electronics shipment prepared for courier collection and safe transit

Modern flat-screen televisions are fragile in ways that aren't obvious from handling them. The screen panel can be cracked by pressure on the back of the unit, vibration can damage internal components, and the edges and corners are susceptible to impact damage. Without correct packaging, a TV that survived years on a wall can arrive at its destination with a shattered screen.

This guide covers how to pack a TV for courier shipping, with specific advice for when you don't have the original box.

If You Have the Original Box

The original manufacturer's packaging is designed specifically for the TV model and provides the best fit. Use the original foam inserts (they are shaped to hold the TV at the correct points and distribute force away from the screen). Check that the box has not been crushed or weakened. Reinforce all seams with packing tape before shipping.

Even with the original box, consider placing it inside a second outer box with 10 cm of cushioning material around it for courier shipping, since the original box alone is designed for retail handling — not courier network conditions.

Packing a TV Without the Original Box

  1. Remove the stand. Pack the stand separately in its own wrapping. Shipping the TV with stand attached increases the risk of leverage damage during handling.
  2. Cover the screen. Use a screen protector or large foam sheet cut to size, taped gently to the screen edges (not across the screen surface). This protects against surface scratches.
  3. Apply corner protectors to all four corners (available from packaging suppliers in various sizes).
  4. Wrap the entire TV in multiple layers of bubble wrap (minimum 3 layers, large bubble), securing with tape around the wrap, not across the screen.
  5. Source a custom-cut or oversized flat cardboard box. TV-sized boxes are available from packaging suppliers. The box should be at least 10 cm larger than the TV on all sides. Some removal companies and furniture stores give away suitable boxes.
  6. Line the box with 10 cm of foam or cushioning on all sides. Place the TV upright (not flat) — TVs are designed to handle weight vertically, not flat.
  7. Seal and reinforce with tape. Mark 'FRAGILE — DO NOT STACK — THIS WAY UP'.

Common Questions

Will the courier accept a TV as a standard parcel?

It depends on the size. Most TVs up to 55 inches can be shipped as oversize parcels, subject to the carrier's maximum dimension limits. Very large TVs (65+ inches) may exceed parcel limits and require a freight or specialist service. Check dimensions before booking — both size and volumetric weight apply.

Should I insure a TV shipment?

Yes, for any TV above a few hundred euros in value. Carrier liability for screen damage is typically very limited. Transit insurance covering the full replacement value gives you meaningful protection if the screen arrives broken.

Get an Instant Shipping Quote

Compare carrier rates in seconds. Door-to-door delivery worldwide.

Compare Rates Now →

Related Articles

Flat-pack furniture components packaged for courier shipping and safe transport
Packaging Guides

How to Pack Flat-Pack Furniture for Shipping

Flat-pack furniture components — boards, shelves, frames, glass panels, and hardware bags — are awkward to ship because they're long, often heavy, and their surfaces scratch easily. The main risks are surface damage, bending under their own weight, and hardware bags puncturing or falling out of packaging.

November 22, 2026
Person inspecting a used cardboard box for reuse in shipping — checking structural integrity
Packaging Guides

How to Safely Reuse Boxes for Shipping

Reusing cardboard boxes for shipping is both economical and environmentally sensible. Most corrugated cardboard boxes retain good structural strength after a first use, as long as they haven't been wet, crushed, or heavily creased.

November 22, 2026
Automotive parts packaged for courier shipping in a logistics warehouse
Packaging Guides

How to Pack Automotive Parts for Shipping

Automotive parts present a wide range of packaging challenges. A gear knob and a front bumper require completely different approaches. Getting the packaging right matters both for the part itself and for other parcels in the same delivery vehicle — heavy metal parts that break free from poor packaging can damage everything around them.

November 22, 2026
Double-boxed fragile shipment being prepared by warehouse staff for courier collection
Packaging Guides

How to Double-Box Fragile Items for Maximum Protection

Double boxing is one of the most effective packaging techniques for fragile, high-value, or shock-sensitive items. The principle is simple: an inner box protects the item, and an outer box absorbs and distributes impact before it reaches the inner box. The cushioning layer between them is what makes the system work.

November 22, 2026

Powered By

powered-by-0powered-by-1powered-by-2powered-by-3

Supported Payments

supported-payment-0supported-payment-1supported-payment-2supported-payment-3supported-payment-4