Packaging GuidesNovember 22, 20262 min read

How to Pack Ceramics and Pottery for Shipping

Carefully packaged fragile items in a warehouse ready for courier shipping

Ceramics and pottery are among the most damage-prone items in courier shipping. Even small impacts that would leave most items undamaged can shatter thin ceramic walls, chip glazed surfaces, or crack handles. The good news is that with correct packaging, ceramic items can travel safely — it just requires more preparation than a standard parcel.

This guide covers the packing method, the right materials, and the double-boxing technique that provides the best protection for ceramic and pottery shipments.

Materials You Need

  • Bubble wrap (small bubble for detailed items, large bubble for padding)
  • Foam sheets or foam peanuts (peanuts are not ideal — they settle in transit; foam sheets or moulded foam is better)
  • An inner box that fits the item closely
  • An outer box — at least 10 cm larger on all sides than the inner box
  • Packing tape (minimum 50 mm width for sealing)

The Double-Boxing Method

Double boxing is the standard professional method for shipping ceramics. The inner box protects the item; the outer box absorbs impact before it reaches the inner box.

  1. Wrap the ceramic item in several layers of bubble wrap (bubble side facing in), covering all surfaces. Pay extra attention to handles, spouts, lids, and any protruding elements.
  2. Line the inner box with a layer of foam or crumpled paper. Place the wrapped item inside with at least 3–5 cm of cushioning on all sides. Shake the box gently — if the item moves, add more cushioning.
  3. Seal the inner box with tape and label it 'FRAGILE' on all sides.
  4. Line the outer box with 10 cm of foam or crumpled paper on the base. Place the sealed inner box inside, then fill all remaining space (sides and top) with 10 cm of cushioning material.
  5. Seal the outer box, reinforce all seams with tape, and mark it 'FRAGILE — DO NOT STACK'.

Packing Multiple Ceramic Pieces Together

If sending multiple ceramic items in one box, wrap each piece individually so that no ceramic surface touches another ceramic surface. Separate them with foam sheets between layers. The combined weight should not cause lower items to be crushed — stack plates vertically (on edge) rather than flat if possible, as vertical stacking distributes weight more evenly.

Common Questions

Will the courier's 'fragile' label guarantee careful handling?

Fragile labels are not guaranteed to prevent rough handling — they are a notification, not an instruction that all operators follow. Package as though the item will be dropped from 1 metre, because that outcome is possible. Good packaging protects against handling regardless of how the label is read.

Should I insure ceramic shipments?

For valuable ceramics, transit insurance is worth considering. Note that most insurers require appropriate packaging (the double-boxing method described here) as a condition of paying a claim. Inadequate packaging can void your cover.

Get an Instant Shipping Quote

Compare carrier rates in seconds. Door-to-door delivery worldwide.

Compare Rates Now →

Related Articles

Flat-pack furniture components packaged for courier shipping and safe transport
Packaging Guides

How to Pack Flat-Pack Furniture for Shipping

Flat-pack furniture components — boards, shelves, frames, glass panels, and hardware bags — are awkward to ship because they're long, often heavy, and their surfaces scratch easily. The main risks are surface damage, bending under their own weight, and hardware bags puncturing or falling out of packaging.

November 22, 2026
Person inspecting a used cardboard box for reuse in shipping — checking structural integrity
Packaging Guides

How to Safely Reuse Boxes for Shipping

Reusing cardboard boxes for shipping is both economical and environmentally sensible. Most corrugated cardboard boxes retain good structural strength after a first use, as long as they haven't been wet, crushed, or heavily creased.

November 22, 2026
Automotive parts packaged for courier shipping in a logistics warehouse
Packaging Guides

How to Pack Automotive Parts for Shipping

Automotive parts present a wide range of packaging challenges. A gear knob and a front bumper require completely different approaches. Getting the packaging right matters both for the part itself and for other parcels in the same delivery vehicle — heavy metal parts that break free from poor packaging can damage everything around them.

November 22, 2026
Large packaged electronics shipment prepared for courier collection and safe transit
Packaging Guides

How to Pack a TV for Shipping: What to Do When You Don't Have the Original Box

Modern flat-screen televisions are fragile in ways that aren't obvious from handling them. The screen panel can be cracked by pressure on the back of the unit, vibration can damage internal components, and the edges and corners are susceptible to impact damage. Without correct packaging, a TV that survived years on a wall can arrive at its destination with a shattered screen.

November 22, 2026

Powered By

powered-by-0powered-by-1powered-by-2powered-by-3

Supported Payments

supported-payment-0supported-payment-1supported-payment-2supported-payment-3supported-payment-4