If you're used to tracking individual parcels with real-time GPS updates and push notifications at every step, pallet freight tracking may feel surprisingly sparse. That's because pallet freight operates through a different network — one where goods move between depots in consolidated truck loads, and scan events happen at key transfer points rather than continuously.
This guide explains how pallet tracking events are generated, what the typical status sequence looks like, and what to do if your pallet doesn't arrive when expected.
How Pallet Freight Tracking Events Are Generated
Pallet freight networks are hub-and-spoke operations. Your pallet is collected from your premises, transported to the carrier's regional depot, consolidated with other freight on a trunking vehicle going in your direction, transferred to a delivery depot near the destination, and then loaded onto a local delivery vehicle.
A scan event (also called a tracking event or status update) is recorded each time the pallet is physically handled at one of these network points and scanned. This typically means you'll see four to six events across the entire journey, rather than the continuous updates you might expect from a parcel carrier.
Typical Tracking Status Sequence
- The driver has collected the pallet from your premises.
- The pallet has been received and scanned at the carrier's regional hub.
- The pallet is on a trunking vehicle between depots. This phase has fewer scan events.
- The pallet has arrived at the local delivery depot near the recipient.
- A local driver has loaded the pallet and is heading to the delivery address.
- The pallet has been delivered and a proof of delivery (POD) generated.
What to Do If Your Pallet Is Delayed
If your pallet hasn't arrived by the expected delivery date and the tracking hasn't updated in 24–48 hours, follow these steps:
- Check the last tracking event for context. An 'arrived at depot' event from days ago without an 'out for delivery' event often means the pallet is queued for delivery rather than lost.
- Contact the carrier's freight customer service directly (not the same team as parcel customer service) with your consignment number. Ask for a trace — this is a formal internal investigation into the pallet's whereabouts.
- If you booked through Cargosender, raise a support request through your account. The team can follow up with the carrier on your behalf.
- For international shipments, delays of 24–48 hours beyond the estimated date are common during peak periods or for cross-border routes with customs clearance. Allow for this before escalating.
Common Questions
Why has my pallet been 'in transit' for three days with no update?
This is normal for road freight on longer European routes. The trunking leg between hubs may take 24–48 hours with no intermediate scans. Unless the expected delivery date has passed, the pallet is likely on its way. If it has passed, contact the carrier for a trace.
What is a proof of delivery (POD) for pallets?
A POD is the signed delivery receipt created when the consignee accepts the pallet. It records the date, time, and signature of the person receiving the goods. It's the primary document in any damage or non-delivery claim, which is why it's critical to note any visible damage on the POD before signing.




