Most pallet shipping problems are preventable. The majority of refusals, delays, damage claims, and unexpected surcharges trace back to a small number of recurring mistakes — and all of them can be avoided with a few minutes of preparation.
Here are the eight most common pallet shipping mistakes and what to do instead.
1. Inaccurate Weight and Dimension Declarations
Carriers weigh and measure pallets at their depots. If the actual figures are significantly higher than your booking, you'll receive a correction surcharge. Use a weighing scale rated for pallet loads, and measure the loaded height including the pallet deck.
2. Not Anchoring Stretch Film to the Pallet
Wrapping the goods without anchoring the film to the pallet deck means the entire load can slide off the pallet on impact. Always start wrapping from the base, looping through the pallet legs or deck to anchor the film to the pallet structure.
3. Overhanging the Pallet Edge
Boxes that extend beyond the pallet footprint can be damaged by fork tines during handling and may press against adjacent pallets in transit. Keep all boxes within the pallet edge. Use a larger pallet format if your load is too wide.
4. Using a Damaged Pallet
A pallet with cracked boards, broken blocks, or damaged stringers can collapse under load. Carriers will typically refuse collections on defective pallets. Use EPAL-stamped euro pallets in good condition and inspect them before loading.
5. Incorrect or Missing Labelling
A pallet with no visible label, an obscured barcode, or a label attached with masking tape to stretch film will cause problems at the carrier's depot. Attach labels to at least two sides in sealed plastic wallets and confirm barcodes can be scanned.
6. Exceeding the Height Limit
Most pallet couriers set a maximum loaded height of 160–200 cm (including the 15 cm pallet height). Pallets that exceed this limit may be priced as 1.5 or 2 pallet spaces. Check the specific carrier's height limit before booking.
7. Missing Customs Documents for International Shipments
For cross-border pallet shipments outside the EU, missing or incorrect customs documentation is one of the main causes of delays and demurrage charges. Prepare your commercial invoice, packing list, and HS codes before the collection day — not after the driver has left.
8. Not Being Present at Collection
If nobody is available to sign the collection receipt and confirm the pallet details when the driver arrives, most carriers will not collect. Make sure someone authorised to sign is available throughout the collection window and that the pallet is accessible without needing access to locked areas.
Book Pallet Shipping Online
Once your pallet is prepared and you have accurate dimensions and weight, you can compare courier quotes and book online through Cargosender. Instant quotes, label generation, and collection scheduling in a few minutes.




