If your pallet contains chemicals, flammable liquids, compressed gases, batteries, or other potentially hazardous materials, you are subject to ADR regulations — the European Agreement concerning the International Carriage of Dangerous Goods by Road. Getting this wrong carries serious consequences: rejected collections, fines, and in severe cases, criminal liability.
This guide gives an overview of how ADR applies to pallet shipments, the main dangerous goods classes, and what most pallet couriers will and won't carry.
What Is ADR?
ADR (Accord relatif au transport international des marchandises Dangereuses par Route) is an international treaty governing the carriage of dangerous goods by road across Europe and beyond. It applies to commercial freight crossing international borders and, in most EU member states, to domestic commercial transport above certain thresholds.
ADR classifies dangerous goods into nine hazard classes, each with specific packaging, labelling, documentation, and vehicle requirements.
The Nine ADR Hazard Classes
- Class 1: Explosives
- Class 2: Gases (flammable, non-flammable, toxic)
- Class 3: Flammable liquids (including many paints, solvents, and fuels)
- Class 4: Flammable solids, self-reactive substances, pyrophorics
- Class 5: Oxidising substances and organic peroxides
- Class 6: Toxic substances and infectious substances
- Class 7: Radioactive material
- Class 8: Corrosives (acids, alkalis, battery acid)
- Class 9: Miscellaneous dangerous substances (including lithium batteries and dry ice)
What Standard Pallet Couriers Accept
Most standard pallet courier services — the kind you book through comparison platforms — carry only limited quantities (LQ) of certain dangerous goods that fall within ADR's exemption thresholds. These are typically consumer-grade goods such as:
- Consumer products containing small amounts of flammable liquid (aerosols, cleaning products in limited quantities)
- Lithium batteries or battery-powered devices that meet IATA/ADR packing requirements
- Paints or coatings in small volumes within LQ thresholds
For anything outside LQ exemptions — industrial chemicals, full fuel tanks, Class 1–7 goods — you need a specialist dangerous goods carrier with ADR-certified drivers and appropriate vehicles. Always confirm with your carrier before booking.
Key Documents Required
- Dangerous Goods Declaration: confirms the shipper's classification and compliance
- Safety Data Sheet (SDS): required for most hazardous substances
- Correct ADR hazard labels on individual packages and the outer pallet
- Emergency response information must accompany every shipment
Common Questions
Do lithium batteries always require ADR compliance?
Lithium batteries are classified as Class 9 dangerous goods. However, batteries contained in devices (such as laptops or phones) shipped within standard quantities often qualify for LQ exemptions. Standalone lithium batteries shipped in large quantities require full ADR compliance. Always check with your carrier.
Who is responsible for DG compliance?
The shipper (the person presenting the goods for transport) is primarily responsible for correct classification, packaging, labelling, and documentation. The carrier is responsible for ensuring the vehicle and driver meet ADR requirements, but cannot verify every shipment for content.




