Furniture is classified under Chapter 94 of the Harmonised System, which covers seats, other furniture, mattress supports, bedding and lighting fittings. The chapter is straightforward in structure but requires accurate identification of the main frame material, which is the primary driver of the six-digit subheading.
This guide covers headings 9401 (seating), 9403 (other furniture) and 9404 (mattresses and bedding), with the specific subheadings for the most common furniture types shipped across borders.
The Material Rule: What Determines the Subheading
For furniture, the material of the structural frame determines the HS subheading. Upholstery, cushions, glass inserts and other non-structural materials do not change the classification. A fabric sofa on a wooden frame is a wooden seat (9401.61). A glass-top dining table on a metal frame is metal furniture (9403.20).
For flat-pack furniture shipped in parts, classify by the finished article the parts will form — not as parts, unless you are genuinely exporting only parts without the complete set.
9401 — Seats
Heading 9401 covers all types of seating: office chairs, dining chairs, sofas, bar stools, garden chairs and anything else primarily designed for sitting. Seats convertible into beds also classify here rather than under mattresses.
9401.30 — Office Chairs (Swivel, Height-Adjustable)
Subheading 9401.30 covers swivel seats with variable height adjustment — the defining characteristic of an office chair. This applies regardless of the frame material: mesh-back chairs, leather executive chairs, ergonomic task chairs and gaming chairs with height adjustment all classify here.
9401.61 / 9401.71 — Upholstered Sofas and Armchairs
Upholstered seating splits by frame material:
9401.61 — Upholstered wooden-frame seating. Covers fabric sofas, leather sofas, armchairs, loveseats, chesterfields and settees where the frame is wood.
9401.71 — Upholstered metal-frame seating. Covers industrial-style sofas and chairs where the structural frame is metal.
9401.69 / 9401.79 — Non-Upholstered Chairs and Bar Stools
Dining chairs and bar stools without upholstery:
9401.69 — Other wooden seats (wooden dining chairs, Windsor chairs, bentwood chairs, wooden bar stools, wooden folding chairs).
9401.79 — Other metal seats (metal dining chairs, metal bar stools, metal bistro chairs, metal folding chairs).
9401.80 — Seats of other materials (plastic garden chairs, polypropylene stacking chairs, inflatable chairs).
9401.40 — Seats convertible into beds (sofa beds, futons that fold flat).
9403 — Other Furniture
Heading 9403 covers all furniture other than seating: tables, desks, cabinets, wardrobes, shelving, bed frames and storage units. It is subdivided by both use-room (office, kitchen, bedroom) and frame material.
9403.10 / 9403.30 — Office Furniture (Desks, Filing Cabinets)
Office furniture splits by frame material:
9403.10 — Metal office furniture. Covers metal desks, metal filing cabinets, metal office shelving and metal pedestals.
9403.30 — Wooden office furniture. Covers solid wood desks, MDF/chipboard office desks, wooden bookcases used in offices, and wooden filing units.
9403.40 — Wooden Kitchen Furniture
Subheading 9403.40 covers wooden furniture designed for kitchens: base units, wall units, kitchen islands, larder cabinets and kitchen plinths. The key qualifier is “for kitchens” — a freestanding wooden cabinet not intended for kitchen use goes under 9403.60.
9403.50 — Wooden Bedroom Furniture
Subheading 9403.50 covers wooden furniture intended for bedrooms. This includes the most common bedroom furniture items:
Wardrobes (fitted and freestanding), sliding-door wardrobes
Chest of drawers, dressers, dressing tables
Wooden bed frames (single, double, king, super-king)
Bedside tables and nightstands
Ottoman bed frames, storage beds, platform beds
9403.60 — Other Wooden Furniture
Subheading 9403.60 is the residual code for wooden furniture not specifically designated for offices, kitchens or bedrooms. This covers the widest range of common household items:
Dining tables and dining sets (table only — chairs are 9401)
Coffee tables, side tables, end tables
Bookshelves, bookcases and display units (not for office use)
TV units, entertainment stands, media consoles
Hallway furniture: coat racks, shoe benches, console tables
9403.20 — Other Metal Furniture
Subheading 9403.20 covers metal furniture not classified as office furniture: metal bed frames, metal garden tables, metal shelving units for homes, metal lockers, metal storage racks and industrial racking. Metal bunk beds classify here.
9403.70 — Plastic Furniture
Subheading 9403.70 covers furniture of plastics: plastic garden tables, polypropylene storage units, plastic children’s furniture and acrylic display stands. Note that plastic garden chairs are seating and go under 9401.80, not here.
9404 — Mattresses, Bedding and Sleeping Articles
Heading 9404 covers the full range of sleep products from mattress supports and mattresses through to duvets, pillows and sleeping bags.
9404.10 — Mattress supports. Covers slatted bed bases (wooden or metal), box springs and other rigid bases that sit inside the bed frame to support the mattress.
9404.21 — Mattresses of cellular rubber or plastics. Covers foam mattresses, memory foam mattresses, latex mattresses, and roll-up foam mattresses.
9404.29 — Other mattresses. Covers pocket spring mattresses, open-coil mattresses, hybrid mattresses (spring + foam layers) and air mattresses.
9404.30 — Sleeping bags.
9404.40 — Quilts, duvets, comforters, eiderdowns, pillows, cushions and bolsters. This covers all filled bedding articles regardless of the filling material (feather, down, synthetic fibrefill, wool).
Common Classification Mistakes
Using upholstery material instead of frame material. A leather-upholstered wooden chair is a wooden seat (9401.61). The leather covering does not make it a leather product. The frame determines the classification.
Classifying a dining set as a single code. A dining table and four chairs is not classified as one article. The table classifies separately (9403.60 for wooden) and the chairs separately (9401.69). They must each be declared with their own HS code.
Classifying flat-pack parts as parts rather than furniture. Flat-pack furniture shipped in components (boards, fittings, hardware, instructions) is classified as the finished article it will become, not as parts. The parts subheadings (9403.91, 9403.99) are for businesses exporting components for assembly elsewhere, not for flat-pack consumer furniture.
Confusing mattresses with mattress supports. A slatted bed base is a mattress support (9404.10). The mattress itself is 9404.21 or 9404.29. These are different products requiring separate declarations if shipped together.
Shipping Furniture with CargoSender
Furniture is one of the most common categories shipped on pallet services across Europe. CargoSender offers pallet shipping alongside standard parcel services, covering everything from a single dining chair to a full bedroom set. For cross-border shipments, the HS code is required on the customs declaration — entering the correct code for each article avoids delays at the border.
Get a quote for furniture shipments at cargosender.com/hs-codes/furniture.




