Pallets are the most efficient way to ship large or heavy freight across Europe. Whether you are moving industrial equipment, sending furniture, or consolidating multiple boxes into one shipment, pallet freight saves money compared to multiple individual parcels. This guide covers everything you need to know: pallet types and dimensions, weight limits, how to pack and wrap, labelling rules, and how to get a quote.
Europallet Dimensions and Types
The European pallet (EUR-pallet or EPAL pallet) is the standard across most European logistics networks. Its dimensions are 1,200 mm × 800 mm (120 cm × 80 cm), and it is recognised by the EPAL brand mark stamped on the blocks. Other sizes you will encounter:
EUR 1 (Europallet): 1,200 × 800 mm — the most common size; fits two side-by-side in a standard truck
EUR 2: 1,200 × 1,000 mm — used for heavier loads; slightly less common in groupage
EUR 3: 1,000 × 1,200 mm — same surface area as EUR 2 but rotated; used in some industries
Half pallet: 600 × 800 mm — half a Europallet; useful for smaller loads
Pallet Weight Limits
Weight limits vary by carrier, but as a general guide for European road freight:
Standard EUR 1 pallet: maximum 500 kg total (goods + pallet) for groupage (LTL) services
Maximum height when loaded: typically 120 cm for standard LTL; some carriers allow up to 200 cm for dedicated vehicles
The pallet itself weighs approximately 20–25 kg; include this in your total weight calculation
Freight pricing is based on actual weight OR volumetric weight (length × width × height ÷ 333), whichever is greater
How to Pack and Wrap a Pallet
Proper packing prevents damage and ensures your shipment meets carrier requirements:
Stack goods evenly: heaviest boxes on the bottom, lighter items on top; keep the load within the pallet footprint — no overhang
Use corner boards and edge protectors for fragile or stacked cartons
Wrap with stretch film (at least 3–4 layers): start from the bottom, overlap 50% each pass, finish at the top and tuck the end under
Secure with strapping bands for heavy or tall loads; cross-strapping at the base is good practice
Place a waterproof cover or pallet hood over the top to protect against rain during loading/unloading
Labelling Your Pallet
Carriers require shipping labels to be attached correctly to avoid misrouting:
Attach labels to at least two sides of the pallet (all four sides recommended)
Print labels at A6 or A5 size; protect them inside a clear plastic sleeve taped flush to the pallet
For international or non-EU shipments, also attach customs documents (commercial invoice, CN23) in a separate document pouch on the outside of the pallet
LTL vs FTL: Groupage or Full Load?
Most individual or small-business pallet shipments use LTL (Less than Truckload) or groupage services, where your pallet shares space in a truck with other shippers’ freight:
LTL / groupage: cost-effective for 1–5 pallets; transit time typically 2–5 business days within Europe
FTL (Full Truckload): entire truck dedicated to your load; faster and more secure; economical from about 10–15 pallets
For 1–3 pallets from Portugal across Europe, groupage is almost always the right choice




