Shipping a bicycle by courier is entirely possible, but a bike is awkward to pack and large enough to attract an oversized surcharge on many services. Getting the disassembly and packaging right protects the frame and components in transit, and knowing how carriers calculate the cost saves you from surprises at checkout.
What You Need Before You Start
Before packing your bicycle, gather:
- A bike box. Local bike shops almost always have spare boxes from new bike deliveries and will give them away for free. Standard road-bike boxes measure roughly 140 × 85 × 25 cm; mountain-bike boxes are similar. Specialist double-walled bike shipping boxes are also available to buy.
- Bubble wrap, foam pipe insulation, or old rags to pad the frame and fork.
- Cable ties or zip ties to secure components inside the box.
- Pedal spanner (15 mm) and Allen keys for disassembly.
- Strong packing tape — at least two rolls.
How to Disassemble a Bicycle for Shipping
A bicycle must be partially disassembled to fit in a standard box. Work through these steps:
- Remove both wheels. Deflate the tyres slightly to reduce the risk of puncture from pressure changes during air freight. Wrap each wheel in bubble wrap.
- Remove the pedals. The right pedal unscrews anticlockwise; the left pedal is reverse-threaded and unscrews clockwise. Getting this wrong strips the threads, so double-check before applying force.
- Turn the handlebars 90 degrees and loosen the stem bolt to lower them, or remove them entirely if the box width requires it. Secure with cable ties or tape so they cannot rotate in transit.
- Lower the saddle and seatpost as far as possible into the frame.
- Protect the rear derailleur. It is the most fragile component on the bike. Wrap it in foam or bubble wrap, or remove it and tape it to the frame if there is any risk of it touching the inside of the box.
- Wrap the frame tubes — especially the down tube, top tube, and chainstays — in foam pipe insulation or bubble wrap. These are the first points of contact if the box is dropped.
- Place the frame in the box first, then fit the wheels alongside it. Fill any empty space with scrunched packing paper or additional bubble wrap so nothing can move.
Dimensions and Volumetric Weight
A boxed bicycle is large. A typical packed box measures around 140 × 85 × 25 cm. The volumetric weight for parcel couriers is calculated by dividing the box volume in cubic centimetres by 333 (the standard parcel divisor):
140 × 85 × 25 = 297,500 cm³ ÷ 333 = approximately 893 kg volumetric weight
A road bike with packaging weighs roughly 12 to 15 kg; a mountain bike 15 to 20 kg. The volumetric weight of around 90 kg is far higher than the actual weight, so you will almost always be charged on volumetric weight, not actual weight. This is what makes bicycle shipping expensive on standard parcel services.
Some carriers also apply an oversize surcharge if any single dimension exceeds 120 cm or the total of all three dimensions exceeds a threshold (commonly 300 cm). Check your carrier's oversized item policy before booking.
Electric Bikes and Lithium Batteries
E-bikes present an additional complication: the lithium-ion battery is classified as Class 9 dangerous goods under IATA regulations. Standard parcel carriers typically refuse e-bikes with the battery installed.
Options for shipping an e-bike:
- Remove the battery and ship the frame separately. Many carriers will accept the battery-less e-bike frame as a standard oversized parcel. The battery can then be shipped separately as a declared lithium-ion battery under the carrier's dangerous goods service, if accepted.
- Use a specialist freight or pallet service that accepts Class 9 dangerous goods. This is typically more expensive but handles the full e-bike in one shipment.
- Contact the carrier directly before booking to confirm their current e-bike policy, as it varies by route and carrier.
Customs and HS Code for Bicycles
For shipments within the EU — from Portugal to France, Germany, Spain or any other member state — no customs declaration is needed. The bicycle moves as standard freight within the single market.
For shipments outside the EU — to the UK, Switzerland, the USA, or further — you must complete a CN23 customs declaration. The HS tariff code for a standard bicycle without a motor is 8712.00. Declare the actual value of the bicycle; undervaluing a high-end road or mountain bike is a declaration offence.
Import duty rates on bicycles vary by destination. The EU applies a standard import duty on bicycles from outside the EU; the UK has its own tariff schedule post-Brexit. Check the destination country’s tariff for HS 8712.00 before shipping.
Tips to Reduce the Cost
Because bicycles are charged on volumetric weight, the box dimensions drive the cost more than the actual bike weight. A few ways to keep the volumetric weight down:
- Use the smallest box that fits the bike safely. A tighter pack costs less than a loose bike in an oversized box.
- Remove the front fork if the bike is small enough to fit in a narrower box without it. Specialist bike-travel bags pack even more compactly than cardboard boxes, though they offer less impact protection.
- Compare services before booking. Freight and pallet services price large oversized items differently from parcel couriers and can sometimes be significantly cheaper for a single bicycle.




