Fragile items break in transit not because carriers are careless, but because a parcel can experience drops, stack pressure, and vibration across hundreds of kilometres. A well-packed fragile item should survive a 1-metre drop onto a hard floor in any orientation. This guide walks through the method that makes that possible.
The Core Principle: Immobilise and Absorb
Every fragile packing method is a variation of two ideas: the item must not move inside the box, and there must be enough cushioning to absorb impact before the force reaches the item. Getting either wrong means breakage.
The double-box method is the gold standard:
- Wrap the item and place it in an inner box sized just large enough to hold it with 5 cm of padding on every side.
- Seal the inner box, then place it inside a larger outer box with at least 5 cm of void fill separating the two boxes on every side.
- The inner box protects against direct impact; the outer box protects against stack pressure and rough handling.
Always use new, undamaged corrugated boxes. A box that has been used before has weakened corners and compressed walls. The corrugation provides most of the box’s structural strength — once it is crushed, the protection is gone.
Choosing the Right Void Fill
The box must be full: an item that can move even a few centimetres will build momentum and strike the box wall with enough force to break. Use one of these materials to fill all empty space:
- Bubble wrap: the most versatile option. Use large-bubble wrap for the first wrap around the item (impact absorption) and small-bubble wrap as a secondary layer (surface protection). Always put the bubbles facing the item, not outward.
- Foam peanuts: good for filling void space around an already-wrapped item. They compress under pressure and distribute force evenly. Poor choice as the only protection because they compact down in transit, leaving the item loose.
- Air pillows: lightweight and effective for filling large voids. Best used around a double-boxed item rather than directly against fragile surfaces.
- Crumpled kraft paper: an affordable, eco-friendly option. Requires more paper than you expect to fill a box properly. The item should not shift when you shake the sealed box.
- Foam sheeting or foam-in-place: best for very high-value items. Custom foam cut to shape the item provides maximum protection and prevents any movement.
Packing Specific Fragile Items
Ceramics and pottery:
- Fill any hollow areas (inside mugs, bowls) with crumpled tissue or kraft paper before wrapping. This prevents the walls from flexing under pressure.
- Wrap handles, spouts, and rims with extra bubble wrap — these are the first points to snap.
- Wrap the full piece in two layers of large-bubble bubble wrap and secure with tape. Place upright in the box.
Glass items (vases, ornaments, glassware):
- Pack upright where the item is taller than it is wide. Glasses and vases are stronger standing up than on their side.
- Nest multiple glasses by placing a smaller glass inside a larger one, with paper between them, and treating the nested set as a single item for wrapping.
- Never pack two glass items touching each other, even with bubble wrap between them. Put each in its own inner box or separate section.
Mirrors and framed pictures with glass:
- Tape a large X across the glass surface with masking tape before wrapping. If the glass cracks, the tape holds the fragments together and reduces the risk of shards cutting through the packaging.
- Apply foam corner protectors to all four corners before wrapping. Corners are the most vulnerable point on a framed item.
- Label the box “GLASS – DO NOT BEND”. Flat items are sometimes placed in bending machines at automated sorting hubs.
Artwork (canvas, unframed prints):
- Roll prints in a cardboard tube — much safer than folding. Use a tube at least 10 cm in diameter and seal each end with endcaps.
- Stretched canvases should be packed face-to-face in pairs (separated by glassine paper) or individually face-down on a foam sheet, with corner protectors.
Sealing and Labelling the Box
Sealing a box properly is as important as packing it. Use the H-tape method: run tape along all seams on the top and bottom of the box, then run two parallel strips across the box to form an H shape. This distributes force along the seam rather than concentrating it at the centre.
Use tape at least 48 mm wide and rated for shipping (not sellotape or standard office tape). Apply at least 7 cm of overhang on each side of the seam.
Label clearly on at least three sides of the box:
- “FRAGILE” in large text. This alerts handlers and automated scanners, though it is not a guarantee of gentle treatment.
- “THIS SIDE UP” with arrows for items that must stay upright.
- “GLASS” or “DO NOT BEND” where relevant.
Carrier Coverage for Fragile Items
Most parcel carriers include an exclusion in their standard terms for items that are inherently fragile, such as glass, ceramic, and artwork. This means that even with declared value, a claim for breakage may be rejected if the carrier decides the item was fragile by nature.
Before booking a high-value fragile shipment, read the carrier’s terms carefully and consider whether specialist art or fragile-goods insurance is appropriate. For standard fragile household items, proper packaging is the most reliable protection: a well-packed parcel that arrives undamaged is a better outcome than a claim that partially compensates for breakage.




