Fragile items break in transit not just from drops, but from sustained vibration, compression from other parcels stacked on top, and the item moving inside inadequate packaging. Good packing prevents damage across all these scenarios, not just the obvious one.
The Double-Boxing Method
Double-boxing is the most reliable method for fragile items. The item goes into its first box (ideally the original packaging, which is designed to protect it). The first box then goes inside a larger outer box with at least 5–10cm of padding material on all six sides between the two boxes. If the item has no original packaging, wrap it first in foam or bubble wrap before placing it in the inner box.
Padding Materials
- Bubble wrap: good for wrapping individual items. Use large-bubble wrap for general fragile items; small-bubble wrap for smaller items. Minimum 3 layers wrapped around the item.
- EPE foam (expanded polyethylene): dense, closed-cell foam that absorbs impact well. Available as sheets or foam peanuts. Foam sheets provide better consistent coverage than peanuts, which can settle and leave voids.
- Air pillows: inflatable plastic pillows that fill void space and absorb vibration. Useful for filling gaps but should not be the only protection.
- Crumpled paper: inexpensive void fill. Less effective than foam at absorbing impact but useful for filling gaps around already-wrapped items.
Specific Items
- Ceramics and glassware: wrap each piece individually in at least 3 layers of bubble wrap. Fill hollow interiors (cups, vases) with crumpled tissue or paper before wrapping. Pack items so they cannot contact each other. Never pack multiple unwrapped ceramics together.
- Mirrors and picture frames: apply foam corner protectors. Lay a foam sheet or bubble wrap layer on each face. Sandwich between two rigid boards (cardboard, corrugated, foam board). Tape the boards together. Pack upright, not flat.
- Electronics: use anti-static bags and foam. The original box is usually the best packaging. If unavailable, embed the device in a close-fitting foam cut-out inside a box.
- Liquids: seal bottles with tape over the cap. Place each bottle in a sealable plastic bag. Wrap in absorbent material (kitchen roll) around the bag before padding.
The Shake Test
Before sealing the box, pick it up and gently shake it in all directions. If you can hear or feel movement inside, the packing is insufficient. Add more padding until nothing moves.
Fragile Labels
Fragile labels are worth using — they provide notice to handlers — but should not be relied on as the primary protection. Assume that at some point the parcel will be dropped, turned upside down, or have heavy items placed on top of it. Pack to survive that treatment regardless of the label.




