Getting the pallet dimensions right before you request a shipping quote is one of the most important steps in freight planning. Carriers charge by the greater of the actual weight or the volumetric (dimensional) weight of the loaded pallet, so an error in either measurement leads to either a surprising surcharge at invoice time or an overestimated quote.
This guide explains what to measure, how to calculate volumetric weight, standard pallet sizes, and how to use a pallet shipping calculator.
What to Measure on a Loaded Pallet
You always measure the loaded pallet — the pallet board plus the goods stacked on it, plus any shrink wrap or banding. Do not measure the pallet dimensions alone. The carrier will assess your shipment as it arrives: if the declared dimensions are significantly smaller than what turns up, an adjustment charge applies.
- Length (L): measure the longest side of the loaded pallet at the widest point. If goods overhang the pallet board, measure to the outer edge of the goods.
- Width (W): measure the shorter side, again to the widest point of the loaded goods.
- Height (H): measure from the floor to the top of the highest point of the load, including the pallet board itself (a standard Euro pallet board is typically 14–15 cm tall).
- Weight: weigh the entire loaded and wrapped pallet. This is the gross weight the carrier will use as the actual weight.
How to Calculate Volumetric Weight for a Pallet
Volumetric weight (also called dimensional weight or chargeable weight) reflects the space a shipment takes up on a truck or aircraft rather than its physical mass. Carriers use it because a large, lightweight pallet occupies as much floor space as a heavy one.
The standard formula for road freight pallets is:
Volumetric weight (kg) = Length (cm) × Width (cm) × Height (cm) ÷ 4,000
Some carriers use a divisor of 3,000 for air freight or when calculating ldm (loading metre) based pricing. Always check which divisor applies to the specific service you are quoting.
Example: a pallet measuring 120 cm × 80 cm × 100 cm with an actual weight of 200 kg.
- Volumetric weight: 120 × 80 × 100 ÷ 4,000 = 240 kg
- Actual weight: 200 kg
- Chargeable weight: 240 kg (the higher of the two)
Loading Metres (LDM): How Carriers Price Pallet Space
For full-truck-load and part-load road freight, many carriers price by loading metre (ldm) rather than by weight. A loading metre is 1 linear metre of truck trailer floor space (2.4 m wide × 1 m long).
Loading metres = (Length (m) × Width (m)) ÷ 2.4
A standard Euro pallet (1.2 m × 0.8 m) occupies 0.4 ldm. Two Euro pallets placed side by side across the trailer width use 0.4 ldm of trailer floor. A UK pallet (1.2 m × 1.0 m) occupies 0.5 ldm.
Standard Pallet Sizes
Pallet sizes vary by region and industry. The most common types:
- Euro pallet (EUR/EPAL): 1,200 mm × 800 mm. The standard for most European road freight. Maximum load: 1,500 kg static / 1,000 kg dynamic.
- UK pallet (British standard): 1,200 mm × 1,000 mm. Common in UK distribution and warehousing. Takes up half a truck’s trailer width.
- Half pallet: 600 mm × 800 mm. Used for lighter or smaller consignments. Two half pallets equal one Euro pallet footprint.
- ISO pallet (North American / GMA): 1,219 mm × 1,016 mm (48 × 40 inches). The standard for North American retail and food industries.
- Pallet height (loaded): most carriers set a maximum loaded height of 220 cm (2.2 m) for standard road freight. Heights above this may require special vehicle booking.
Common Measurement Mistakes
- Measuring the empty pallet only. The loaded dimensions are what the carrier sees and charges for. Always measure after loading.
- Forgetting the pallet board height. A Euro pallet board is 14–15 cm. If you measure only from the base of the goods to the top, you will under-declare the height.
- Ignoring overhang. If goods extend beyond the pallet board edges, the actual footprint of the shipment is larger than the pallet size. Measure the outer edge of the goods.
- Using the wrong divisor. The 4,000 divisor applies to most road freight; air freight typically uses 6,000 (1 kg per 6,000 cm³). Using road divisors for air quotes will produce a lower volumetric weight than the carrier will actually apply.
Calculate Your Pallet Shipping Cost
Enter your loaded pallet dimensions and weight into CargoSender’s pallet shipping calculator to get an instant quote. The calculator automatically applies the correct volumetric weight formula and shows current rates for your destination.




